Remote Control - Cambridge Audio azur 851E User Manual

Remote control

The 851E is supplied with a CA System remote control
that operates both this amplifier and Cambridge Audio
851 series and Stream Magic products. Insert the
supplied AAA batteries to activate.
The functions relevant to the amplifier are as follows:
Standby/On
1
Switches the amplifier between On and Standby mode.
Brightness
2
Adjust the backlight of the front panel display; bright,
dim or off.
Mute
3
Mutes the audio on the pre-amplifier. The mute mode is
indicated by Mute appearing and the volume level being
replaced by two flashing dashes in the display. Press
again to cancel mute.
Volume
4
Increase or decrease the volume of the amplifier output.
Illuminate button
5
Press to illuminate the buttons on the remote.
S1–S8 Sources
6
Used to select the source inputs.
Source Direct
7
Press to give the audio signal a more direct path to the
power amplifier stage of your amplifier, bypassing the
bass and treble control circuits for the purest possible
sound quality.
Trigger 1 and Trigger 2
8
Pressing either button to toggle on/standby a 851W
power amplifier that is connected through the rear
Trigger Out 1 or 2.
azur 851E
1
2
3
4
5
4
6
7
8
7