Electrolux EHD30010P User Manual

Ceramic glass induction hob
Hide thumbs Also See for EHD30010P:

Advertisement

user manual
Ceramic glass induction hob
EHD30010P

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EHD30010P

  • Page 1 Ceramic glass induction hob EHD30010P...
  • Page 2: Table Of Contents

    2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information Helpful hints and tips Installation instructions Care and cleaning Product description What to do if… Operating instructions Environment concerns Subject to change without notice Safety information For your safety and correct operation of •...
  • Page 3: Installation Instructions

    You find the rating plate of the ap- for electrical connections. pliance on its lower casing. • The electrical mains terminal is live. EHD30010P 949 594 208 00 • Make electrical mains terminal free of volt- 220-240 V 50-60 Hz...
  • Page 4 4 electrolux Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm +1 mm min. 25 mm min. 5 mm min. 20 mm min. 38 mm min. 5 mm If you use a protection box (additional 5 mm and protective floor directly below accessory), the front ventilation space of the appliance are not necessary.
  • Page 5: Product Description

    electrolux 5 Product description Cooking surface layout Induction cooking zone 1400 W, with Power function 2500 W Induction cooking zone 2300 W, with Power function 3700 W Control panel Control panel layout Use the sensor fields to operate the appliance. Displays, indicators and sounds tell which functions operate.
  • Page 6: Operating Instructions

    6 electrolux sensor field function increase or decrease the time starts the Power function starts and stops the STOP+GO function Heat setting displays Display Description The cooking zone is off The cooking zone operates Keep warm setting is on / STOP+GO function is active The Automatic heat up function is on The induction cooking zone does not sense the cookware There is a malfunction...
  • Page 7 electrolux 7 Automatic Heat Up Power management The power management divides the power between two cooking zones in a pair (see the figure). The power function increases the power to the maximum level for one cooking zone in the pair and automatically decreases in the second cooking zone to a lower power You can get a necessary heat setting in a level.
  • Page 8: Helpful Hints And Tips

    8 electrolux • Checking the remaining time: select Touch the symbol to switch off this func- the cooking zone with . The indicator of tion. The heat setting that you set before the cooking zone flashes faster. Display comes on. shows the remaining time.
  • Page 9: Care And Cleaning

    electrolux 9 Operating noises The noises are normal and do not refer to any defects. If you can hear • cracking noise: cookware is made of dif- Energy saving ferent materials (Sandwich construction). • If possible, always put the lids on the •...
  • Page 10: What To Do If

    10 electrolux Removing the dirt: rings, water rings, fat stains, shiny met- 1. – Remove immediately: melting plas- allic discolorations. Use a special tic, plastic foil, and food containing cleaner for glass ceramic or stainless sugar. Use a special glass ceramic steel.
  • Page 11: Environment Concerns

    electrolux 11 code for the glass ceramic (it is in the corner dealer will not be free of charge, even during of the cooking surface) and an error message the warranty period. The instructions about that comes on. the customer service and conditions of guar- If you operated the appliance incorrectly, the antee are in the guarantee booklet.
  • Page 12 www.electrolux.com www.electrolux.com.hk 892932470-C-032010...

Table of Contents