Advertisement
The heat setting
Touch the control bar at the necessary heat
setting. The heat setting indicators come on.
The automatic heat up
The Automatic heat up function sets the
highest heat setting for some time, and then
decreases to the necessary level.
Touch
. The indicator flashes. Set the heat
setting (1-8). The indicator of the heat setting
comes on. The indicator above
and after some time goes out.
The time of the automatic heat up changes
for different heat settings.
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
Switching the Power function on and off
The Power function makes more power avail-
able to the induction cooking zones. The
Power function is activated for 10 minutes at
most. After that the induction cooking zone
automatically switches back to the highest
heat setting (9). To switch on, touch
comes on
4
5
6
7
8
indicator above comes on. To switch off,
touch a heat setting (1-9).
Power management
The power management divides the power
between two cooking zones in a pair (see the
figure). The power function increases the
power to the maximum level for one cooking
zone in the pair and automatically decreases
in the second cooking zone to a lower power
level. The display for the reduced zone alter-
nates.
Using the Timer
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for one cooking
session.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
• Selection of the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• Starting the Count Down Timer: touch
of the timer to set the time (
9
minutes). When the indicator of the cook-
ing zone flashes slower, the time counts
down.
• Checking the remaining time: select
the cooking zone with
the cooking zone flashes faster. Display
shows the remaining time.
• Changing the Count Down Timer: se-
lect the cooking zone with
, the
.
electrolux 7
00
99
-
. The indicator of
touch
or
Advertisement
