Operating Sequence - Electrolux EWI1235 Instruction Booklet

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 95°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash or a soak phase,
pour detergent into the appropriate compartment
marked .
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
.
17
4. Switch the machine on
To switch the machine on, press the ON/OFF button
: the mains-on light comes on. The display will
show three flashing dashes or a blinking zero.
5. Select the desired programme
Turn the programme selector dial to the desired
position: the display will show the duration of the
selected programme.
The lights corresponding to the different phases
making up the selected programme light on.
6. Select the spin speed
or option
Depress the spin speed button
required speed or option
comes on.
to choose the
: the corresponding light