Instructions For Totally Built-In Appliances - AEG Electrolux EU6232I Installation And Instruction Manual

Instructions for totally built-in
appliances
Dimensions of the recess
Height 880 mm
Depth 550 mm
Width 560 mm
The appliance's door has been locked in position
for transport by means of pins on both sides.
According to the door opening direction, remove
relevant pins at the top and at the bottom.
For safety reasons, minimum ventilation must be as
shown in Fig. 1.
Attention: keep ventilation openings clear of
obstruction.
Push appliance into the housing until stop strip (A)
touches the kitchen unit.
If after having carried out the previously described
operation there is still some space left between the
appliance and the kitchen unit, fit the trimming
provided together with the appliance on the stop strip
(A).
Open the door and push the appliance against the side
of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the kit
included with the appliance. Snap vent
grille (C) and hinge cover (D) into position.
44
50 mm
D567
A
D022
A
D265
D
D020
Fig. 1
min.
cm 2 200
Fig. 2
Fig. 3
Fig. 4
C