Servicing And Cleaning The Ice Dispenser; To Change The Liamp; When The Appliance Is Not In Use - Electrolux EUFG29800W User Manual

Servicing and cleaning the ice
dispenser
When necessary, clean the surfaces of
the dispenser and the ice container
that are accessible from the outside,
using only a soft cloth and warm water.
Never use cleaning agents with a
grinding or aggressive effect.
When necessary, the feeder and the
ice container can be cleaned after
removal of the surfaces accessible
from the outside, using only a soft
cloth and warm water.
Ensure that the ice container is
thoroughly dry before being re-fitted.
If the system is not to be used for a
long period, it is advisable to switch off
the ice machine and water supply,
empty the ice container and fit the
cover supplied over the delivery hole
for ice in the door. When re-starting,
avoid using the ice produced during
the first day.
Defrosting
Defrosting is not necessary.
Every 24 hours, the evaporator is
defrosted automatically.
To change the lamp
Disassemble the lamp by using a
screwdriver in the recess on the lamp
insert. To prise it out of its location.
Assemble a new lamp by guiding it
into a centred position and press until
it snaps into place.

When the appliance is not in use

Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet is to be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
16