Operating Sequence - Electrolux EW878F Instruction Booklet

Operating sequence

Before washing your first load of laundry, we
recommend that you run a cotton cycle, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
P0876
.
.
3. Measure out the additive
If required, pour fabric softener into the
compartment marked
«MAX» mark.
P0877
4. Select the desired option(s)
Depress one or more buttons depending on the
selected programme.
5. Select the programme and start it
Turn the programme selector dial clockwise to the
required wash programme and depress the ON/OFF
button: the operating pilot light comes on and the
machine starts to operate.
M0043S
14
without exceeding the
P0080