Summary of Contents for American Standard Electronic Air Cleaner
Page 1
• Maintenance • Operation • Service MAINTENANCE/REPLACEMENT SCHEDULE Fan ON (Continuous) Conditions Dusty Normal Cleanable 14-30 30-60 Pre-Filter Days Days Collector Cells Months Months Electronic Cleaner O P E R AT IN G LI G For maximum efficiency, the air cleaner cells and the pre-filter should be inspected and cleaned on a regular basis.
Page 2
How the Electronic Air Cleaner Works. Air Cleaner Cabinet Electronic Cell Figure 1. Electronic Air Cleaner Cabinet with 1” Pre-Filter Components A. The cabinet is installed into the return ductwork of your air conditioning system. B. The Power Door located on the front of...
On/Off Switch & Indicator Light Your Electronic Air Cleaner has an air flow sensor that will provide power to the electronic cells when your conditioning air system fan is on. For fully automatic operation, just turn the switch on the front of the Power Pack “ON”.
OFF and the fan switch to AUTO to assure that the air system will not turn on while cleaning. 2. Push the Electronic Air Cleaner power switch to the “OFF” position. Unplug power cord at the wall before removing the Electronic Cells.
Replacing An Ionizing Wire If an ionizing wire should break, it can be replaced as follows: 1. Remove all pieces of broken wire. Make sure supports at each end are in good condition and not bent out of shape. 2. Hook the new wire onto the support at one end.
U.S.A. and Canada. If any part of your Electronic Air Cleaner fails because of a manufacturing defect within five years from the date of the original purchase, Warrantor will furnish without charge the required replacement part. Any local transportation, related service labor, mechanical filters and diagnosis calls are not included.
Need help?
Do you have a question about the Electronic Air Cleaner and is the answer not in the manual?
Questions and answers