N The Water Inlet Filter; Servicing - Electrolux EW1000W Installation And Instruction Manual

Before contacting your local Service Centre, please make the following checks
Problem
The machine does not start up
n
The machine does not fill
n
The machine empties as it fills
n
The machine does not drain or
n
spin
The machine leaks or overflows
n
The machine vibrates or is noisy
n
38

SERVICING

Possible cause
n The START/STOP button has not been
depressed
n The door is not closed properly
n No water is entering the machine (see: the
machine does not fill)
n The selector dial is not correctly positioned
n
The water tap is not turned on
n
The water supply has been disconnected
n The inlet hose is kinked
n The water pressure is too low
n The water inlet filter is clogged
n The door is not closed properly
n The end of the drain hose is too low
n The end of the drain hose is submerged in
water
n Drain pipe has no vent-hole
n You have selected a gentle wash cycle which
stops with the water of the last rinse in the
tub
n
The drain filter is clogged
n
The drain hose is kinked
n
The drainage system pipes are blocked
n The drain hose extension is incorrect
n The wash load is unbalanced. Redistribute
the load inside the drum to allow the
machine to spin.
n Too much detergent
n Unsuitable detergent
n The inlet hose is loose
n The detergent dispenser drawer or recess is
clogged
n The end of the drain hose is not securely
positioned
n The drainage system pipes are blocked
n
The internal packing and transit bolts have
not been removed
n The machine is not level
n
The machine is in contact with the wall or
furniture
n The washing load is badly distributed
n The machine is overloaded