Cooking With The Automatic Warm Up Function - Electrolux EHS 8670 P Installation And Operating Instructions Manual

Cooking with the Automatic
Warm up Function
All four of the hob's cooking zones can be controlled
in nine stages and have an automatic warm up func-
tion:
– 1, lowest heat setting
– 9, highest heat setting
– a, automatic warm up function
When you select the required heat setting using the
+ sensor field, the cooking zone will work for a spe-
cific time on full power and then switch automatically
to the set heat setting.
The duration of the automatic warm up function de-
pends on the heat setting selected.
Select the required cooking zone with the cooking
zone sensor fields.
Touch sensor field + until it reaches the required
heat 1 to 8. The set heat setting will be displayed
first. After five seconds a (= automatic warm up
function) will replace the heat setting in the display.
At the end of the warm up time the heat setting will
be shown again.
3
If during the automatic warm up function you
select a higher setting, eg. from 3 to 5, the
warm up time is adjusted to match. If you se-
lect a lower setting, the warm up time ends at
once.
2
If you start cooking again on a cooking zone
that is still warm, the automatic warm up func-
tion uses the residual heat. This saves time
and energy.
3
If you again wish to switch on a cooking zone
on which hot items are already standing, you
should always select the required heat setting
with the - sensor field. In this way you can
avoid making the food boil over as a result of
the extra burst of heat from the automatic
warm up.
14