Use; Control Panel; Controls - Electrolux EWF 810 Instruction Book

Table of Contents

Advertisement

132991140 gb.qxd
21/08/2003

Use

Control panel

1 Detergent dispenser drawer
2 "DELAY START" button
This button makes it possible to delay the
starting of the washing programme by 6 and 3
hours. The delay you have selected is indicated
by the coming on of the corresponding light.
You must select this option after you have
set the programme and before you press the
START PAUSE button
You can cancel the delay time at any
moment, before you press the START/PAUSE
button.
If you have already pressed the START/PAUSE
button, and you wish to cancel the delay time,
proceed as follows:
• set the washing machine to PAUSE by pressing
the START/PAUSE button;
• press the DELAY button once, the light relevant to
the selected delay goes off .
• press the START/PAUSE button again to start the
programme.
Important!
To modify the DELAY START: first you have to
cancel the previously selected programme by
turning the programme selector dial to "0".
Select again the desired programme and set the
new DELAY START.
The door will be locked throughout the delay
time.
If you need to open the door, you must first set
the washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
The delay start cannot be selected with
programmes
(drain) and
10:09
Pagina
8
(Nero/Process Black pellicola)
H
H
.
(spin).
3 "QUICK WASH" button
This button allows you to select the Quick Wash
function, for laundry that is only slightly soiled (not
for wool, hand wash and economy programme
60E).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. load for cotton 3 kg.
4 "SUPER RINSE" button
The Super Rinse option can be selected with all
programmes except the wool and hand wash
programmes. The machine will perform 2 additional
rinses. This option is recommended for people who
are allergic to detergents, and in areas where the
water is very soft.
5 "START/PAUSE" button
After having selected the required programme,
press this button to start the machine; the
corresponding pilot light stops flashing and
remains lit.
To interrupt a programme which is running,
depress the Start/Pause button: the
corresponding pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the
START/PAUSE button again.
8
EWF

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewf 1010

Table of Contents