Rear Shock Absorber Adjustment - Yamaha Raptor YFM350S Ower's Manual

EBU12871

Rear shock absorber adjustment

The spring preload can be adjusted to suit the
rider's weight and riding conditions.
Adjust the spring preload as follows.
1. Loosen the locknut.
2. To increase the spring preload, turn the
adjusting nut in direction a. To decrease
the spring preload, turn the adjusting nut
in direction b.
1. Spring preload adjusting nut 2. Locknut
4-16
CAUTION:
_
Never attempt to turn the adjusting nut be-
yond the maximum or minimum setting.
_
NOTE:
_
A special wrench can be obtained at a
Yamaha dealer to make this adjustment.
_
1. Special wrench
3. The length of the spring changes 1 mm
(0.04 in) per turn of the adjusting nut.