Timer Operation - Fujitsu ASTG09KMCA Operating Manual

Timer Operation

Note for timer settings:
Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock incorrect.
In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting.
ON timer or OFF timer
You can set the ON timer or OFF timer with the following steps.
Press the TIMER SETTING button to start the setting.
1
The WEEKLY indicator will be fl ashing on the remote controller.
Press the SELECT button to choose the desired mode. The mode
2
will change as follows:
ON/OFF
WEEKLY
(ON)
Press the NEXT button. Continue to setting for each mode.
3
* To cancel timer setting during the setting process, press the
TIMER SETTING button again.
Adjust the time by pressing the SELECT button while the clock
4
indicator is blinking. Each time you press the button, the time will
change by +5/-5 minutes. Pressing down will change the time by
+10/-10 minutes.
Press the SEND button.
5
To redo the timer setting, perform step 1 to 5 again.
To cancel the ON/OFF timer, press the ON/OFF button while the ON/
OFF indicator is on. (Erases the indicator)
Program timer (combined use of the ON timer and the OFF timer)
You can set an integrated ON–OFF or OFF–ON timer.
Either of the timer whose confi gured starting time is closer to the
current time works fi rst, and the order of timer operation is displayed
as follows:
Timer
ON–OFF timer
OFF–ON timer
To set the program timer, conduct the same steps 1~5 for the ON/
OFF timer. (Select ON⇔OFF in Step 2)
Notes:
• If you change the setting value for the timer after the program timer
is set, the counting down of the timer will be reset at that moment.
• Time setting for each combination should be within a span of 24 hours.
SLEEP timer
To set the SLEEP timer, fi rst follow steps 1~3 for the ON/OFF timer.
Adjust the time by pressing the SELECT button while the clock
4
indicator is blinking.
Each time you press the button, the time changes as follows:
0H 1H
30M 00M
(30 min.)
Press the SEND button.
5
To cancel the SLEEP timer, press the SLEEP button while the SLEEP
indicator is on. (Erases the indicator)
To help you to fall asleep comfortably and prevent excessive warming
or cooling in sleep, the SLEEP timer controls the temperature setting
automatically in accordance with the set time shown as follows. The
air conditioner completely turns off after the set time has elapsed.
In HEAT mode
1 °C 2 °C 3 °C 4 °C
30 min.
1 hour
1.5 hour
Set time
OPERATING MANUAL
En-6
9333003016_OM_EN.indd 6 9333003016_OM_EN.indd 6
ON/OFF ON/OFF
⇔
(OFF) (ON OFF)
Indicator on remote controller display
2H 3H 5H 7H
00M 00M 00M 00M
In COOL or DRY mode
Set time
Set
temperature
1 hour
1 °C
WEEKLY timer
ON and OFF timer can be combined, and up to 4 reservations (program
) per day and 28 reservations per week.
Before setting the program, please set the week and time of the air
conditioner fi rst.
If the week and time are not set, the weekly timer will not operate
correctly at the set time.
Please refer to "remote controller preparation" (page 2).
SLEEP
Example of WEEKLY timer 1
(OFF)
Program
Monday to
7:00 ON 24°C
Friday
Wake up
Saturday
Program
Sunday
ON
9:00 OFF
Example of WEEKLY timer 2
You can specify a given temperature in the ON setting in WEEKLY
timer.
Program Program
7:00 ON 22°C 9:00 ON 24°C
* You can set the temperature for AUTO, COOL, and DRY modes within
the range of 18-30°C, for Heat mode the range is 10 or 16-30°C.
Even if you set to 10, 16, or 17°C, if you run the product on AUTO,
COOL, or DRY, it will run at 18°C.
Notes:
• Operations modes other than the temperature setting will be the
same at the last time operation was stopped, so Cooling → Heating
→ Cooling → Heating type of operations cannot be automatically
set.
• If you set the ON timer and OFF timer on the same time, the air
conditioner will run the ON timer. If two ON timer are set at the same
time, the air conditioner will run in the order of the program number.
• If there is a power interruption, such as due to a power outage
9H
during the WEEKLY timer setting or a circuit breaker cutting out,
00M
hours the internal timer of the air conditioner will be incorrect. (See page
9 "Auto-restart".) In such a case, the main timer lamp will notify you
of this by fl ashing, so carry out matching of the time and date. (See
page 2 "remote controller preparation".)
• You cannot use the WEEKLY timer together with the other timers.
If you want to run the product on WEEKLY timer after using the ON/
OFF Timer, Program Timer, or SLEEP Timer while the WEEKLY
timer is running, you need to activate the WEEKLY timer again.
2 °C
Program Program
9:00 OFF 17:00 ON 26°C
Leave for work Come back home
No timer settings
Program Program
ON ON ON
11:00 OFF 17:00 OFF
Program Program
17:00 ON 26°C 23:00 ON 22°C
Program
23:00 OFF
Go to sleep
Program
23:00 OFF
(continued)
7/1/2013 10:40:02 AM 7/1/2013 10:40:02 AM