Table of Contents
Advertisement
Connecting the water hose.
The water coupling is connected to a water
tap with an external 3/4 inch thread.
This work is to be carried out by a skilled
plumbing installation technician.
The refrigerator is to be connected with a
shut-off cock. There are different type-approved
taps and tap assemblies on the market.
The water hose must not be cracked, squeezed
or be in tight bends.
If you require a longer water hose than that supplied,
then a VDE-approved 150 38 85-02/0 supply hose
should be used.
Before the refrigerator is taken into use in its final
location, ensure that the water connection has been
correctly carried out, that there is no leakage at the
connection to the refrigerator water valve or to the
water tap, and that the four spacers are properly in
position, see the illustration.
We recommend that the refrigerator is placed on a
"run-off" mat intended for refrigerators and freezers,
which makes it easier to detect possible leakage.
This run-off mat is available from your dealer.
Installation of carbon filter
On delivery the carbon filter is placed in a plastic
bag to secure the length of life of the carbon filter.
The filter should be placed behind the grill before
the cabinet is turned on.
The cover can be opened by simultaneously pressing
the lever on the right of grill (1) and turning the
cover outward (2). The carbon filter is then mounted
in the slot found in the back of the cover.
The filter should be handled carefully so fragments
don't loosen from the surface.
Electrical cord
Do not remove the power cord by pulling on its
lead, particulary when the product is being
pulled out of its niche.
Damage to the cord may cause a short-circuit, fire
·
and/or electric shock.
In the event of damage to the appliance's main
·
cable, only an authorised service company
recommended by the manufacturer or a similarly
qualified person may adjust it in order to avoid
shock hazard for the user.
1
2
14
3
Electrolux 818 38 21-01/9
Advertisement
Table of Contents
