Charging The Batteries - Swisscom Classic E104 User Manual

swisscom-classicE104, sc-en, A31008-G3000-F001-1-7619

Charging the batteries

The batteries supplied are not charged.
To charge the batteries, insert the handset in the base sta-
tion or charging unit (accessory) – you will hear the confirma-
tion beep. The charging status icon flashes on the handset
display to indicate that a charging operation is in progress:
§
Batteries empty
¦
Batteries
– We recommend initially charging the batteries for at least
16 hours without interruption – irrespective of the
charging status icon.
– Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
It is recommended that you discharge the batteries at re-
gular intervals.
– The batteries heat up during charging.
– The battery charging status is only displayed correctly
after uninterrupted charging/discharging. You should
therefore avoid opening the battery compartment unne-
cessarily.
Approved batteries:
Nickel-cadmium (NiCd)
Sanyo N-3U (700 mAh)
GP GP60AAKC (600 mAh)
Varta 751RS (700 mAh)
Mobile Power 700 (700 mAh)
Panasonic 60 DT (600 mAh)
Always replace both batteries and only use batteries of the
same type/from the same manufacturer.
¥
¤
1
/ charged
3
Nickel-metal-hydride (NiMH)
Sanyo H-3 U (1500 mAh)
GP GP130 AA HC (1300 mAh)
GP GP150 AA HC (1500 mAh)
Varta VH 1101 or Phone Power
(1100 mAh)
Panasonic HHR-110 AA (1100 mAh)
Friwo NiMH (1400 mAh)
Toshiba TH-1200 AARE (1200 mAh)
3000Cla.fm
14.01.00
2
Batteries / charged
3
Batteries full
7