swisscom-classicE104, sc-en, A31008-G3000-F001-1-7619
Preparing the handset
Contents of the package
Handset, 2 batteries, belt clip, user manual.
Inserting the batteries
• Never use ordinary (non-rechargeable) batteries.
Only use approved batteries of the same type
(rechargeable), as otherwise battery damage can
result (dangerous), see table page 7.
• The handset's battery compartments feature the
following diagrams:
g
h
• Do not use strange charging devices, as this
could damage the batteries.
• Please dispose of old, defective batteries in an
environmentally friendly manner in accordance
with the relevant legislation.
• Insert the batteries, ensuring correct polarity – see figu-
re on left.
• Insert the battery cover approx. 3 mm into the battery
compartment and slide it upwards until it clicks into pla-
ce.
• To open the battery cover, press the grooved area on the
cover and slide downwards.
6
Insert rechargeable batteries correctly in
accordance with polarity symbols.
Operate battery type in accordance with
these operating instructions.
3000Cla.fm
14.01.00
Need help?
Do you have a question about the Classic E104 and is the answer not in the manual?