Electrolux EWF 1220 Instruction Book page 10

• set the washing machine to Pause by pressing the
Start/Pause button;
• press the "Delay start" button until the display
0 0
shows the symbole « '».
• press the "Start/Pause" button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to Pause by pressing the
Start/Pause button. After you have closed the door,
press the Start/Pause button again.
9 "Start/Pauze - Marche/Pause" button
(Start/Pause)
This button has two functions:
•
Start: after you have selected the desired
programme and options, press this button to start
the washing machine. The light above the button
will stop flashing and remain lit.
If you have selected a delay time, the countdown
will begin and will be shown on the display.
• Pause: when you press this button again, the
programme in progress is interrupted. The light
above the button will start flashing. To restart the
programme from the point at which it was
interrupted, press the button again.
When you PAUSE the cycle, and it becomes
possible to open the door, provided:
• the washing machine is not in the heating phase;
• the level of the water is not high;
• the drum is not turning.
If all these requirements are met, the door can be
opened.
10 Display
The following pieces of information are shown on the
display:
• Duration of washing programme in hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the Start/Pause button), the displayed time
value decreases by one unit every minute.
• The washing machine has completed the
programme: this is indicated by a flashing zero.
• The washing machine has stopped with water in
the tub, at the end of a programme with the
options: this is indicated by a flashing zero.
• Delay start, a time value indicated in hours and
selected by means of the relevant button.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the Start/Pause button, the
countdown begins, and the delay time value
decreases by one unit every hour up to 2 hours
and then by 30 minutes.
81