Table of Contents
Advertisement
Introduction
Note
•
A normal external device (DVD player or
camcorder, etc.) or a TV tuner box (US Only)
can be connected to the [HDMI IN 1] termi-
nal.
•
To use a TV tuner box (US Only), make sure
to connect it to the [HDMI IN 1] terminal.
HDMI IN 2 (MAGICINFO)
•
Connect the [HDMI IN 2 (MAGICINFO)]
terminal at the back of your LCD Display to
the HDMI terminal of your digital output de-
vice using a HDMI cable.
•
Up to HDMI 1.3 can be supported.
Note
The MAGICINFO OUT port must be connected
to the [HDMI IN 2 (MAGICINFO)] port.
RJ 45 MDC (MDC PORT)
MDC(Multiple Display Control) Program Port
Connect the LAN cable to [RJ45 MDC] on the
product and LAN on the PC. To use an MDC, the
MDC program must be installed on the PC.
Note
Go to Multi Control and select RJ45 MDC as
the MDC Connection.
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
Connect a serial cable (cross type) to [RS232C]
on the product and RS232C on the PC. To use an
MDC, the MDC program must be installed on the
PC.
Note
Go to Multi Control and select RS232C MDC
as the MDC Connection.
Advertisement
Table of Contents
