Table of Contents
Advertisement
3-16
NOTE: The mouse wake up function can only be used with the PS/2 mouse, not with
the COM port or USB type. Some PS/2 mice cannot wake up the system because of
compatible problems. If the specs of your keyboard are too old, it may fail to power
on.
KB Power ON Password
This item sets the password required in order to power on your computer.
NOTE: Do not forget your password, or you will have to clear the CMOS and reset
all parameters in order to utilize this function again.
Hot Key Power ON
This item powers on the system by pressing <Ctrl> key plus one of each function key
(<F1> ~ <F12>) simultaneously.
Restore On AC Power Loss
This item selects the system action after an AC power failure.
[Power Off]: When power returns after an AC power failure, the system's power
remains off. You must press the Power button to power-on the system.
[Power On]: When power returns after an AC power failure, the system's power will
be powered on automatically.
[Last State]: When power returns after an AC power failure, the system will return to
the state where you left off before power failure occurs. If the system's power is off
when AC power failure occurs, it will remain off when power returns. If the system's
power is on when AC power failure occurs, the system will power-on when power
returns.
SI-1Ns42/SI-1Ns60
Chapter 3
Advertisement
Table of Contents
