Table of Contents
Advertisement
3-12
Onboard LAN6 Controller:
This option enables or disables the LAN6 controller.
LAN Boot ROM:
This item allows you to use the boot ROM (instead of a disk drive) to boot-up the
system and access the local area network directly.
SuperIO Device:
Click <Enter> key to enter its submenu:
Onboard Serial Port 1:
This item determines which I/O addresses the onboard Serial Port 1 controller will
access.
[Auto]: The system automatically select an I/O address for the onboard Serial Port 1.
[3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allows you to manually select an
I/O address for the onboard Serial Port 1.
[Disabled]: Disables the onboard Serial Port 1.
Onboard Serial Port 2:
This item determines which I/O addresses the onboard Serial Port 2 controller will
access.
[Auto]: The system automatically select an I/O address for the onboard Serial Port 2.
SI-1Ns42/SI-1Ns60
Chapter 3
Advertisement
Table of Contents
