Abit SX7-533 User Manual page 54

3-30
Onboard Parallel Port:
Five options are available: Auto ) Disabled ) 378h ) 278h ) 3BCh. The default setting is Auto.
Select a logical LPT port name and matching address for the physical parallel (printer) port.
" Parallel Port Mode:
Five options are available: Normal ) SPP ) EPP ) ECP ) ECP/EPP. Default is ECP mode.
Select an operating mode for the onboard parallel (printer) port. SPP (Standard Parallel Port), EPP
(Extended Parallel Port), ECP (Extended Capabilities Port) or ECP/EPP.
Select SPP unless you are certain your hardware and software supports both EPP or ECP mode.
According to your selection, the following items will available.
" EPP Version:
Two options are available: EPP 1.9 or EPP 1.7. The default setting is EPP1.7. When the mode
selected for the parallel port mode is EPP, the two EPP mode options are available.
" Parallel Port IRQ:
Two options are available: Auto or N/A.
" Parallel Port DMA Channel:
Two options are available: Auto or N/A.
The table below will show you the relationship between different Parallel Port Mode and its following
three items.
Items
EPP Version
Parallel Port
IRQ
Parallel Port
DMA Channel
OnBoard Midi Port:
Five options are available: Disabled ) 330h ) 300h ) 290h ) 292h. Default is 330h. This item allows
you to choose the onboard Midi port address.
"
Midi IRQ Select:
Three options are available: 5 ) 10 ) 11. The default setting is 5. This item allows you to choose
the Midi port IRQ.
OnBoard Game Port:
Three options are available: Disabled ) 200h ) 208h. The default setting is 200h. This item allows you
to choose the onboard game port address.
SX7-533
Normal SPP
N/A N/A
Auto Auto
N/A N/A
EPP ECP
EPP 1.9 N/A
or EPP 1.7
Auto Auto
N/A Auto
Chapter 3
ECP/EPP
EPP 1.9
or EPP 1.7
Auto
Auto