Abit BF6 User Manual page 89

The thermal cable D-1
Appendix D The thermal cable
We provide a thermal cable in the motherboard package (see the figure below). This thermal
cable is for you to detect the temperature in the location of your choice. You can attach one
end of the two-threaded thermal cable (A) that comes with the motherboard to the TSYS2
header, then tape the other end of the thermal cable (B) onto the location you want to detect
the temperature.
After you have installed the thermal cable, you will see the detected temperature in the BIOS
Setup and Winbond Hardware Doctor Utility.
User's Manual