Abit BF6 User Manual page 19

Installing the Motherboard
WOL: Wake on LAN Header
Note: Watch the pin position and the orientation
SMB1 & SMB2 header: System Management Bus Connector
master gets priority.
Note: Watch the pin position and the orientation
TSYS2 header:
If you have a Network adapter that supports
this feature, then you can connect the
specific cable from the network adapter to
this header. This feature lets you wake up
your computer via remote control through a
local area network. You may need a specific
utility to control the wake up event, like
® ®
using the Intel LDCM utility or other
similar utilities.
This connector is reserved for system
management bus (SMBus). The SMBus is a
2
specific implementation of an I C bus. I
a multi-master bus, which means that
multiple chips can be connected to the same
bus and each one can act as a master by
initiating a data transfer. If more than one
master simultaneously tries to control the
bus, an arbitration procedure decides which
The TSYS2 is for you to connect an
additional thermistor to detect
temperature in the location of your choice.
You can attach one end of the two-threaded
thermal cable that comes
motherboard to the TSYS2 header, then tape
the other end of thermal cable on the device
you want to detect its temperature.
User's Manual
2-9
2
C is
the
with the