Abit SG-71 User Manual page 73

Introducing the BIOS
PS2KB Wakeup from S3/S4/S5:
Four options are available: Hot Key
Only. This item allow you to choose the computer wakeup method you like, you can choose the method
that you want it to wakeup your system from S3/S4/S5 state.
PS2MS Wakeup from S3/S4/S5:
Three options are available: Disabled
can choose which way you want your system wakeup from S3/S4/S5 by PS2 mouse.
Resume by USB:
Two options are available: Disabled
any event occurring at a USB port will awaken a system from S1/S3 state.
Wakeup by Ring :
Two items are available: Disabled
event affecting the modem ring will awaken a system that has powered down. The effective signal must
come from WOR.
Wakeup by PME# of PCI:
Two items are available: Disabled
event affecting PCI card (PME) will awaken a system that has powered down.
Wakeup by Alarm:
Two items are available: Disabled
can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend
mode.
 Month Alarm/Day of Month Alarm / Time (hh:mm:ss) Alarm:
You can set the Month Alarm, Day of Month Alarm and Time (hh:mm:ss) Alarm. Any event
occurring will awaken a system that has powered down.
Power Button Function:
Two options are available: Instant-Off
when the user presses the power button for more than four seconds while the system is in the working
state, then the system will transition to the soft-off (Power off by software). This is called the power
button over-ride.
Restore on AC Power Loss:
Three options are available: Power Off
setting lets you set the system action after a power failure. This item lets you set the system power state
when power recovers. If you set it to Power Off, when power returns, whatever state your computer was
in before the power failure, the system will always turn off. If you set it to Power On, when power returns,
whatever state your computer was in before the power failure, the system will always turn on. If you set it
to Last State, when the power returns, the computer return to the previous power state.
Password Mouse
Click Move & Click. The default setting is Disabled. You
Enabled. The default setting is Disabled. When set to Enabled,
Enabled. The default setting is Disabled. When set to Enabled, any
Enabled. The default setting is Disabled. When set to Enabled, any
Enabled. The default setting is Disabled. When set to Enabled, you
Delay 4 Sec. The default setting is Instant-Off. It is activated
Power On Last State. The default setting is Power Off. This
Button Only. The default setting is Button
4-23
User's Manual