Harman Kardon AVR 230 Owner's Manual page 11

Main Remote Control Functions
Dolby Mode Selector: This button is used
to select one of the available Dolby Surround
processing modes. Each press of this button will
select one of the Dolby Pro Logic II modes, Dolby
3 Stereo or Dolby Digital. Note that the Dolby
Digital mode is only available with a digital input
selected and the other modes only as long as a
Dolby Digital source is not playing (except Pro
Logic II with Dolby Digital 2.0 recordings, see
page 30). See page 25 for the available Dolby sur-
round mode options.
DTS Digital Mode Selector: When a DTS
source is in use the AVR will select the appropri-
ate mode automatically and no other mode will
be available. Pressing this button will display the
mode currently selected by the AVR´s decoder,
depending on the surround material played and
the speaker setting. When a DTS source is not in
use, this button has no function. (See page 25 for
the available DTS options.)
Logic 7 Selector: Press this button to select
one of the available Logic 7 surround modes. (See
page 25 for the available Logic 7 options.)
Transport Control Buttons: These buttons
do not have any functions for the AVR, but they
may be programmed for the forward/reverse play
operation of a wide variety of CD or DVD players,
and audio or video- cassette recorders. (See page
40 for more information on programming the
remote.)
EzSet Sensor Microphone: The sensor
microphone for the EzSet microphone is behind
these slots. When using the remote to calibrate
speaker output levels using EzSet, be sure that
you do not hold the remote in a way that covers
these slots. (See page 22 for more information on
using EzSet).
Skip Up/Down Buttons: These buttons do
not have a direct function with the AVR, but
when used with a compatibly programmed CD or
DVD player/changer they will change the tracks
on the disc currently being played.
Stereo Mode Selector: Press this button
to select a stereo playback mode. When the but-
ton is pressed so that
appears in the Main Information Display ˜,
the AVR will operate in a bypass mode with true
fully analog, two-channel left/right stereo mode
with no surround processing or bass manage-
ment as opposed to other modes where digital
processing is used. When the button is pressed so
that appears in the Main
Information Display ˜, you may enjoy a two-
channel presentation of the sound along with the
benefits of bass management. When the button
is pressed so that
appears, the stereo signal is
routed to all five speakers, if installed.(See page
21 for more information on stereo playback
modes).
DTS Neo:6 Mode Selector: Pressing this
selector button cycles the AVR through the
various DTS Neo:6 modes, which extract a five- or
seven-channel surround field from two-channel
program material (from PCM source or analog
input signal). The first press selects the last DTS
Neo:6 surround mode that was in use, and each
subsequent press selects the next mode in the
following order:
DTS Neo:6 MUSIC
DTS Neo:6
MOVIES
Macro Buttons: Press these buttons to
store or recall a "Macro", which is a pre-pro-
grammed sequence of commands stored in the
remote. (See page 37 for more information on
storing and recalling macros.)
RDS Select Button: Press this button to dis-
play the various messages that are part of the RDS
data system of the AVR's tuner. (See page
more information on RDS).
Preset Up/Down: When the tuner is in use,
press these buttons to scroll through the stations
programmed into the AVR's memory. When CD or
DVD is selected using the Input Selector button
, these buttons may function as Slow
Fwd/Rev (DVD) or "+10" (CD, CDR).
Clear Button: Press this button to clear
incorrect entries when using the remote to directly
enter a radio station's frequency.
Memory Button: Press this button to enter a
radio station into the AVR 's preset memory. Two
underline indicators will flash at the right side of
the Main Information Display ˜, you then
have five seconds to enter a preset memory loca-
tion using the Numeric Keys
for more information.)
Delay/Prev Ch.: Press this button to begin
the process for setting the delay times used by
the AVR when processing surround sound. After
pressing this button, the delay times are entered
by pressing the Set button
the buttons
/
⁄ ¤
Press the Set button again to complete the
process. (See page 21 for more information.)
› Button: Press this button to change a set-
ting or selection when configuring many of the
AVR's settings.
Speaker Select: Press this button to begin
the process of configuring the AVR's Bass
Management System for use with the type of
speakers used in your system. Once the button
has been pressed, use the
or
select the channel you wish to set up.
Press the Set Button
speaker type (Large, Small or None) appropriate
with the speaker in use. (See page 17 for more
information.)
silence the AVR or TV set being controlled,
depending on which device has been selected.
When the AVR remote is being programmed to
operate another device, this button is pressed with
the Input Selector button
gramming process. (See page 37 for more infor-
mation on programming the remote.)
raise or lower the system volume.
the AVR's EzSet function to quickly and accurately
calibrate the AVR's output levels. During this
sequence, EzSet will automatically adjust the out-
put levels for all channels until they are equal, as
shown by the Program Indicator
green for each channel. (See page 22 for more
information on EzSet.)
have a direct function on the AVR, but when used
with a compatibly programmed VCR, DVD or
35 for
satellite receiver that has a "TV/Video" function,
pressing this button will switch between the out-
put of the player or receiver and the external
video input to that player. Consult the Owner's
Manual for your specific player or receiver for the
details of how it implements this function.
NOTE: With the press of any remote button the
Input Selector button
with the botton pressed will briefly flash red to
confirm the transmission of the command, as
long as there is a function for that button with
the device selected (see function list on
pages 40-41).
. (See page 34
and then using
to change the setting.
buttons to
/
⁄ ¤
and then select the
Mute: Press this button to momentarily
to begin the pro-
Volume Up/Down: Press these buttons to
SPL Indicator Select: This button activates
TV/Video Button: This button does not
associated
MAIN REMOTE CONTROL FUNCTIONS
lighting
11