3D Setup - Sharp Aquos LC-70LE951X Operation Manual

Enjoying 3D image viewing

3D setup

E
Basic operation
Go to "HOME" > "TV Menu" > "Setup" > "Option"
> "3D setup" > select the menu you want to set.
3D auto change
This function allows the TV to switch to 3D mode
automatically when a 3D identification signal is detected.
3D mode is selected automatically when
a 3D signal is detected while viewing
Mode 1
video from a VOD service or HDMI-
connected equipment.
3D mode is selected automatically when,
in addition to detecting a 3D signal while
viewing video from a VOD service or
Mode 2
HDMI-connected equipment, a video
pattern with "Side by Side" or "Top and
Bottom" format is also detected.
Off Auto change is not performed.
NOTE
• 3D signals may not be detected depending on the signal
format.
3D depth control
Select the method for adjusting the 3D depth.
Auto Adjusts the depth automatically.
Manually adjusts the depth using the
Manual
function "Depth change".
NOTE
• This function is only available when the input signal is 3D.
• This function is not displayed depending on the type of 3D
signal.
Depth change
Adjusts the depth manually. "0" is the level where no
adjustment is made.
NOTE
• This function is only available when "3D depth control" is
"Manual".
2D s 3D convert effect
You can adjust the 3D effect when converting images
from 2D mode to 3D mode. Select a desired level of
convert effect from e1 to e16.
NOTE
• This function is only available when converting 2D images to
3D images.
• When you use this function, image conversion on the TV will
result in some differences in the original images and how they
appear.
• 2D images that have been converted to 3D images may be
viewed only for personal use.
Item
Item
Viewing time info
This function allows you to display the elapsed time of
3D image viewing on the screen.
The elapsed time is displayed in one-
Yes hour increments after you start watching
3D images.
No Hide the time.
3D test
This function displays 3D images for testing the 3D
operation. Clicking "Start" on the screen plays back 3D
test images.
NOTE
• If you press B during playback, the previous screen will be
displayed.
3D glasses control
To enable this function, set the location of the TV to
"STORE" (Page 17).
Switch on signals to the 3D glasses.
On When watching 3D images, switch this
setting to "On".
Switch off signals to the 3D glasses.
This will stop the TV from influencing 3D
Off
glasses that may be in that area of the
store.
Item
Item
79