Protection - PP3DP UP! User Manual

1. Introduction
Gloves: When performing certain maintenance procedures, the machine
may be hot and gloves are required to avoid burns.
Safety Glasses: Wear safety glasses to avoid injury to your eyes.

1.2.2 Protection

 The printer must not be exposed to water or rain, or damage may occur.
 Do not shut down the UP! System or pull out the USB cable when loading a
digital model, or the model data may be lost.
 When using the "Extrude" function, keep at least 50mm between the nozzle and
the platform. If too close, the nozzle may get blocked.
 The printer is designed to work properly at an ambient temperature of between
15°C and 30°C and humidity of between 20% and 50%; Operating outside these
limits may result in low quality models.
UP! 3D Printer User Manual 4