Dymo 1750630 User Manual page 19

On the Type a printer name
11
page, do the following:
Enter a name for your
a.
printer in the Printer
name field.
Select whether or not you
b.
want to use this printer as
the default printer.
Click Next.
c.
To print a test label, click
12
Print a test page.
Click Finish.
13
The printer is now available in
the printer list. For the
LabelWriter Duo, you now need to add the tape portion of the printer.
To add the Tape printer portion of the LabelWriter Duo printer
Repeat steps 1-7 in "To add a LabelWriter
1
printer" on page 13.
In the Configure Standard TCP/IP Port
2
Monitor dialog box, do the following:
Under Protocol, select Raw.
a.
Under Raw Settings, enter 9102 in the
b.
Port Number field.
Click OK.
c.
On the Additional Port Information
3
Required page, click Next.
On the Install the printer
4
driver page, do the following:
Choose DYMO from the
a.
Manufacturer list.
Choose DYMO
b.
LabelWriter Duo Tape
from the Printers list.
Click Next.
c.
Adding a Printer in Windows Vista
15