Dymo 1750630 User Manual page 15

In the Configure Standard TCP/IP Port
9
Monitor dialog box, do the following:
Under Protocol, select Raw.
a.
Under Raw Settings, make sure the Port
b.
Number is 9100.
This is the default value.
Click OK.
c.
On the Additional Port Information
10
Required page, click Next.
On the last page of the Add Standard TCP/
11
IP Printer Port Wizard, click Finish.
On the Install Printer Software
12
page of the Add Printer Wizard,
do the following:
Choose DYMO from the
a.
Manufacturer list.
Choose the LabelWriter printer
b.
that you are adding from the
Printers list.
To add the LabelWriter Duo,
choose DYMO LabelWriter
DUO Label.
Click Next.
c.
On the Name Your Printer page,
13
do the following:
Enter a name for your printer in
a.
the Printer name field.
Select whether or not you want
b.
to use this printer as the
default printer.
Click Next.
c.
On the Printer Sharing page,
14
select Do not share this printer,
and then click Next.
To print a test label, select Yes, and
15
then click Next.
Click Finish.
16
The printer is now available in the printer list. For the LabelWriter Duo, you now need to add
the tape portion of the printer.
Adding a Printer in Windows XP
11