NEC LCD19WV User Manual page 5

Controls
OSD (On-Screen Display) control buttons on the front of the monitor function as follows:
1. Basic Key function
RESET
Button
(LCD22WV Only)
OSD Off Message displayed
"Reset Yes/No"
OSD ON Message displayed
(Icon selection stage) "Reset Yes/No"
OSD ON Message displayed
(Adjustment stage) "Reset Yes/No"
OSD Lock Message displayed
"Reset Yes/No"
2. OSD Lock function
To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the
OSD press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
3. OSD structure
Main Menu
(Icon Select, Analog Input)
Press
"MENU"
key
Press
"AUTO" key
Press
"MENU" key
Sub Menu (Icon Select)
Luminance
Contrast
Contrast from Digital-register.
Brightness
Backlight Adjustment.
Image Setup
Focus
Adjusts Picture Phase to reduce Horizontal-Line noise.
Clock
Adjusts picture Clock to reduce Vertical-Line noise.
Image Position
H. Position
Adjusts the horizontal position of the picture.
V. Position
Adjusts the vertical position of the picture.
01_English
AUTO
Active Auto Adjustment Shortcut to Luminance
function (press over 2 (Brightness) window.
seconds).
Act Exit-key. Cursor moves left.
Act Exit-key. Adjust value decrease
or Cursor for adjust
moves left.
Active Auto Adjustment Shortcut to Luminance
function (press over 2 (Brightness) window.
seconds).
Main Menu (Exit)
Press
"- / <" or "+ / >"
Press
Press "AUTO" key
"AUTO" key
Press
"- / <" or "+ / >"
English-3
3
– / < + / >
Shortcut to Luminance
(Contrast) window.
Cursor moves right.
Adjust value increase
or Cursor for adjust
moves right.
Shortcut to Luminance
(Contrast) window.
Press "MENU"
key
Press "AUTO"
or "MENU" key
Sub Menu (Adjust)
Color Temp.
Warm
Recalls Warm Color Temperature from EEPROM.
Cool
Recalls Cool Color Temperature from EEPROM.
sRGB
Recalls sRGB Color Temperature from EEPROM.
User/Red
Red Gain from Digital-register.
User/Green
Green Gain Digital-register.
User/Blue
Blue Gain from Digital-register.
Auto Config
Yes
Auto Adjusts the H/V Position, Focus and Clock of picture.
No
Does not execute Auto Config, returns to main menu.
24/9/07, 5:06 PM
MENU
OSD displayed.
Go to Adjustment
stage.
Go to Icon selection
stage.
Message displayed
"OSD Loked".
Adjust by using
"- / <" or "+ / >"