Lenovo ThinkPad L540 User Manual page 126

Table 4. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)
CPU
Intel (R) AMT
110
User Guide
Submenu item
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Core Multi-Processing
Intel (R) Hyper-Threading
Technology
Intel AMT Control
Value
• Disabled
• Enabled
• Enabled
• Disabled
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Permanently Disabled
Comments
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Enable or disable keyboard
beep when unmanageable
key combinations are
pressed.
Select a SATA Controller
Mode.
Select Enabled to enable
additional execution core
units within a CPU.
Select Disabled to enable
only one execution core
unit within a CPU.
Select Enabled to enable
additional CPU threads.
These Threads appear as
additional processors but
share some resources with
the other threads within a
CPU.
Select Disabled to enable
only one threads within
each execution core unit.
If you select Enabled,
Intel Active Management
Technology (AMT) is
configured and additional
setup items are provided in
Management Engine BIOS
Extension (MEBx) Setup.
If you select Permanently
Disabled, you will never be
able to enable it again. Be
cautious when you want to
use this option.
Note: You can enter the
MEBx Setup menu by
pressing the Ctrl+P key
combination in the Startup
Interrupt Menu window.
To display the Startup
Interrupt Menu window,
press the black button