To Pair Additional Devices; Clearing Memory - Westinghouse Unplug UM100WH User Manual

Then the blue indicator start flashing and Tone Sound, When the speaker
and device have successfully connected.

To pair additional devices

With the Bluetooth device and the unplug-100 speaker both turned on ,
touch the button on the speaker for four seconds to make the speaker
discoverable again . Then follow steps 2-4 on page 7.
The unplug-100 memory can hold up to six paired devices.
You can pair more than six devices, but the memory will never contain more
than six. When the memory is full with six devices and an additional device is
paired, the least recently used is deleted from memory and replaced the
newly paired device.

Clearing memory

To clear the unplug-100 Speaker memory of all devices,
touch and hold both-Vol. Up and Vol. Down (fig.2) button (fig.2)
8