Table of Contents
Advertisement
Installation
The beverage center can be a free-
standing model or can be built in using
dimensions
the cut-out dimensions below.
Product dimensions:
Height: 34
Width: 23
Depth: 23
Product
The beverage center is factory set for a
110° door swing.
clearances
When installed in a corner:
• Allow 4" minimum clearance on the
• Allow 10" minimum clearance on the
• The door swing is reversible on all
Choose the location:
• These products may be closed in on the
• Do not install these products where the
• Do not install where it will be subject to
"
23
3
/
4
(603 mm)
"
34
1
/
2
(876 mm)
/
" (876 mm)
1
2
/
" (603 mm)
3
4
/
" (603 mm)
3
4
hinge side for the 90° door swing and
to allow racks to slide out.
hinge side for a full 110° door swing.
models. If desired, change the door swing
before installation.
top and three sides as long as the front
is unobstructed for air circulation and
proper access to the door.
temperature will go below 55°F (13°C)
or above 90°F (32°C).
direct sunlight, heat or moisture.
Built-In Dimensions
When building in the beverage center,
be sure to allow for a full door swing so
you have full access to the pull-out full
extension drawers.
See the Installation Instructions (Pub. No.
49-60210) for complete directions.
"
23
3
/
4
(603 mm)
NOTE:
Cut-out dimensions:
Handle and
Height: 34
handle standoff
Width: 23
/
"
3
depth is 1
Depth: 24" (610 mm)
4
110°
Black or Stainless Steel Toekick Options
These products are shipped with a black
toekick installed. An optional stainless
steel toekick is also supplied with each
product. For shipping purposes, the
stainless steel toekick is secured to the
back or on the inside of the unit.
Beverage Center
/
1
–35" (876–889 mm)
2
/
" (603 mm) minimum
3
4
10" Minimum
90° Door Swing
to Wall
90°
21-5/8"
23-5/8"
4" Minimum
to Wall
13
Advertisement
Table of Contents
