Advertisement
camera.
Push and release inserted card if you wish to remove or replace the
card.
Turn your camcorder OFF before inserting / removing the SD Card.
- Note that the SD Card has a tiny LOCK switch on the side. Set the
switch to un-LOCK position to be able to store recorded videos, still
pictures on inserted SD Memory Card.
2.4 Power on/off
In power-off state, press and hold the power key to power on the camera.
In power-on state, press the power key to power off the camera.
In power-on state, if the camera is idle for 1 minute, the camera will automatically power off.
In power-on state, when battery level is very low, the camera will turn off after several
seconds.
2.5 Setup menu
In power-off state, press and hold Shutter key then press POWER key turn on the camera,
release Shutter key until enter setup mode, then press the direction key to move the cursor
or adjust the value, press the Shutter key to set and press Delete key to exit. In setup mode
8
Advertisement
