Problem Solver - GE Monogram ZX2YSS Owner's Manual

Stainless steel professional outdoor dual range top burner
Table of Contents

Advertisement

Questions?
Use this
problem
solver!
12
PROBLEM
BURNER WON'T
LIGHT WHEN THE
PUSH BUTTON
IGNITER KNOB
IS TURNED
BURNER FLAME IS
YELLOW OR ORANGE • Check the air shutter for proper adjustment.
IN CONJUNCTION
WITH THE ODOR
OF GAS
LOW HEAT WITH
CONTROL KNOB IN
THE HI POSITION
The Problem Solver
POSSIBLE CAUSE
• Remove the burner grate. With the control knob in the OFF position,
watch the electrode while turning the igniter knob. You should see
a spark jump inside the electrode cap.
• Use a match to light the burner.
• Visually check the electrode and wire while turning the igniter knob.
The only place a spark should appear is at the electrode tip. If the
electrode or wire leaks voltage, remove and replace.
• Purge the gas line of any air.
• Check the orifice for blockage.
• Inspect the igniter tip to make sure it is clean and free from debris.
Clean the area. Readjust for 1/8" gap.
• Check the burner inlet for obstructions.
• Do not place the range top burners in a dusty area.
• Inspect the fuel hose to ensure it is not bent or kinked.
• Adequate gas supply may not be available. Check to make sure there
is gas in the LP tank.
• The burner or burner orifice may need cleaning.
• The air shutter may need adjustment.
Outdoor Range Top Burners

Advertisement

Table of Contents
loading

Table of Contents