Fujitsu LIFEBOOK S762 User Manual page 41

• Hot-swapping: swapping devices while your system is active, using the Safely Remove Hardware icon from your
system tray.
Y
OU SHOULD NEVER LEAVE YOUR
ACCUMULATE INSIDE THE NOTEBOOK
Cold-swapping
To cold-swap modular devices in your Flexible Bay follow these easy steps:
Close any open files.
1
Shut down your LIFEBOOK notebook.
2
Turn your system upside down.
3
As you press the Flexible Bay release
4
latch shown in Figure 18, pull out the
Flexible Bay module until it is clear of the
bay. This will require light force.
Slide the device you are installing into
5
your notebook until it clicks into place.
It is now safe to turn your notebook back
6
on.
You can now access and use the device.
7
Your LIFEBOOK will automatically detect the new device and activate it within your system. The drive letters
associated with the device will be created and listed under My Computer and Windows Explorer.
Hot-swapping
Hot-swapping is provided through the Safely Remove Hardware utility. The icon for the utility appears in the system
tray. Click on the icon and follow the on-screen instructions.
F B
LEXIBLE AY EMPTY WHEN THE NOTEBOOK IS IN OPERATION
.
Flexible Bay
(bottom view)
Flexible Bay
Release Latch
Figure 18. Removing/installing a Flexible Bay device
35 - Flexible Bay Devices
. I ,
F LEFT EMPTY DUST OR FOREIGN MATTER MAY