Table of Contents
Advertisement
Available languages
Available languages
Installing the computer
•
Before installing a computer to the docking station, make sure
to disconnect all the cables connected to the computer.
•
Installing and separating the stand dock after turning the
computer off is recommended.
1
Insert your finger into the groove on the side of the stand dock to
open the top cover of the stand dock.
2
Align the computer connector and the stand dock port at the bottom
of the computer and connect them.
3
Connect the computer's AC adapter to the stand dock.
•
Make sure that you should use the 2.5 Pi(Φ) ATIV Smart PC or
ATIV Smart PC Pro adapter.
•
You can also use the stand dock using only the battery power
of the computer.
•
If the computer doesn't work after being connected with the
docking station, this may be due to poor contact caused by a
foreign substance. Check and remove any substance on the
connection.
7 7
Advertisement
Table of Contents
