Frame Assist (Ruled Lines Display); Exp / E / Iso; Iso-Auto Set; Iso-Auto - Olympus E-420 Instruction Manual

FRAME ASSIST (Ruled lines display)

During live view, you can display the ruled lines on the LCD monitor as a guide when confirming
the composition. Press the INFO button repeatedly to display the ruled lines.
g"Switching the information display" (P. 42)
Custom Menu 1 d EXP / e / ISO

ISO-AUTO SET

You can set the upper limit when ISO is set to [AUTO].
This sets the upper limit of the ISO value that automatically changes. The upper limit can be set
from 100 to 1600.

ISO-AUTO

You can set the shooting mode in which the ISO [AUTO] setting is activated.
[P / A / S]
The [AUTO] setting is activated in all shooting modes except M mode. When [AUTO] is
selected in M mode, ISO 100 is set.
[ALL]
The [AUTO] setting is activated for all shooting modes. The ISO is automatically
selected to obtain the optimal ISO even in M mode.

AEL Metering

You can set the metering mode when pressing the AEL / AFL button to lock the exposure.
• [AUTO] performs metering in the mode selected under [METERING].

BULB TIMER

You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1 e # CUSTOM

w+F

When set to [ON], it will be added to the exposure compensation value and flash intensity
9
control will be performed.

AUTO POP UP

In AUTO or scene mode, the built-in flash pops up automatically in low light or backlight
conditions. When set to [OFF], the built-in flash will not pop up automatically.
92
EN