Table of Contents
Advertisement
G-4
Second way is: When you start to get in the boot sequence, press <F6> key once-then you can see the
"Select First Boot Device" menu show up. Choose floppy as the first boot device then press <Enter>
key to continue the boot sequence.
8. You must flash the BIOS in pure DOS mode. After successfully booting off of the floppy, execute the
flash utility according to these instructions: "amiflash sx7_89.rom" then press the <Enter> key, and
the flashing procedure will start.
When the flash process is complete, you can see the completed message that will ask you to restart
your system.
The AMI flash utility can't be completed under a Windows
®
2000、Windows
XP or Windows
You should check which BIOS file is to be used with your motherboard, don't flash with the wrong
BIOS file. Otherwise, you may cause system malfunctions.
SR7-8X
Note
®
ME environment, you must be in a pure DOS environment.
®
95/98/98SE、Windows
Appendix G
®
®
NT、Windows
Advertisement
Table of Contents
