Top And Back Panels - Sanyo DP42746 Owner's Manual

Œ  Ž
BACK PANEL—BOTTOM VIEW (CENTER)
Œ
HDMI (High Definition Multimedia Interface) Input,
Connect digital video equipment to
PAGES 11 ~ 12—
this jack. It takes only one high bandwidth cable (not
supplied) to communicate between the video/audio
equipment and this TV. This connection is compatible
with DVI equipped devices. (Separate audio connec-
tion and an adapter are required for DVI device.)

Digital Audio Output, PAGE 12—Use an Optical
Audio cable to connect Digital Audio Output to an
advanced stereo home theater system equipped with
Dolby ® Digital 5.1.
Ž
Digital Antenna Input, PAGE 7—Connect an RF
antenna to this jack.

Service Jacks—For production use only

Analog Antenna Input (UHF/VHF/CATV), PAGE 7—
Connect an RF antenna or Analog cable system to this
jack.
‘
S-Video Input (VIDEO1), PAGE 14—To enhance
video detail use the S-Video jacks instead of the Video
jacks, if available on your external equipment.
(S-Video connection will override connection to the
Video input jack [VIDEO1]).

TOP AND BACK PANELS


’
 
’
“
”
•
11
Need help?
Visit our Web site at
‘
“ ” •
Power key
Channel
ML keys
Top Panel View (see items 8, 11, & 17 on page 17.)
Analog Audio Out (L/R) Jacks, PAGE 15—Connect
external audio equipment here.
Audio/Video Input (VIDEO1), PAGE 14—Connect
analog video equipment here.
NOTE: S-Video connection overrides the (Video1)
composite video connection.
Component Video Input (VIDEO2), PAGE 13—
Connect digital video equipment to the Y, Pb, Pr and
Audio L/ R jacks. These jacks will automatically detect
the type of signal being received.
Component Video Input (VIDEO3), PAGE 13—
Connect digital video equipment to the Y, Pb, Pr and
Audio L/R jacks. These jacks will automatically detect
the type of signal being received.
AC IN 120V—Connect power cord here. See page 8.
www.sanyoctv.com
11
Volume
– + keys
9
1-800-877-5032
or Call