How To Operate The Setup Mode; Default Settings; Figure 4 - McIntosh MA7900 Owner's Manual

Hide thumbs

Table of Contents

How to Operate the Setup Mode

Your McIntosh MA7900 has been factory configured

for default operating settings that will allow immedi-

ate enjoyment of superb audio without the need for

further adjustments. If you wish to make changes to

the factory default settings, a Setup Feature is pro-

vided to customize the operating settings using the

Front Panel Display. Refer to the MA7900 Front Panel

Illustration on the previous page while performing an

introduction into operating the Setup Mode, follow the

steps below.

Note: If the MA7900 is currently On, proceed to

step 2.

1. Press the STANDBY/ON Push-button on the Front

Panel or press the

(Power) Push-button on the

Remote Control to switch On the MA7900. The

MA7900 will go through a brief startup intializa-

tion with the Front Panel Display indicating the

last used source and volume setting. This is fol-

lowed by the volume setting indication starting at

zero and then increasing to the last used volume

setting. Refer to figure 1.

SOURCE: CD

Figure 1

2. Press and hold the INPUT CONTROL until the

Front Panel Display indicates "MA7900 V_.__,

S/N: _______". The information indicated on the

Front Panel Display includes the Model Number,

Firmware Version and the Serial Number for this

unit; see page 18 for additional information. Refer

to figure 2.

MA7900 V_.__

S/N: _______

Figure 2

3. Now rotate the INPUT CONTROL Clockwise

until the Front Panel Display indicates "McIntosh

USB AUDIO, V_.__ Firmware". Refer to figure 3

and to page 18 for additional information.

4. Next, rotate the INPUT CONTROL Clockwise

again until the Front Panel Display indicates

"SETUP: SOURCE INPUT, CD :RCA" Refer to

figure 4.

5. To exit from the Setup Mode, press the INPUT

CONTROL and the Front Panel Display will revert

back to its normal display. Refer to figure 1.

Default Settings

The Default Settings Chart below indicates the Func-

tion Name, Default Setting and the Page Number for

15%

additional information.

Function Name

MA7900

McIntosh USB Audio

SOURCE INPUT

(Reassignment)

SOURCE NAME

(Re-asign

Input Names)

PASSTHRU

McIntosh USB Audio

V_.__

Figure 3

SETUP: SOURCE INPUT

: RCA

Figure 4

Default Settings

Setting

Page No.

V_._ _

S/N: _ _ _ _ _ _ _

V_.__

RCA

_____________

OFF

Default Settings

TRIG 1 Output

MAIN

(Action)

TRIG 2 Output

115200

REMOTE

Note: Setup Mode operations should be performed

in the order they appear in the Setup Menu as

they are interactive.

Setup

Table of Contents

Show Quick Links

Hide quick links:

Chapters

Table of Contents

How To Operate The Setup Mode; Default Settings; Figure 4 - McIntosh MA7900 Owner's Manual