Troubleshooting - American DJ SWEEPER BEAM LED User Instructions

Sweeper Beam LED
Channel Value
7
0 - 15
16 - 131
132 - 139
140 - 181
182 - 189
190 - 231
232 - 239
240 - 247
248 - 255
8 0 - 255
9 0 - 255
10 0 - 255
11 0 - 255
12 0 - 255
13 0 - 255
14 0 - 255
15 0 - 255
Sweeper Beam LED
ADJ Products, LLC - www.adj.com - Sweeper Beam LED User Manual Page 21
15 DMX Channel Mode
Function
STROBING
NO FUNCTION
STROBING SLOW - FAST
NO FUNCTION
SLOW OPEN - FAST CLOSE
NO FUNCTION
SLOW CLOSE - FAST OPEN
NO FUNCTION
RANDOM STROBING
NO FUNCTION
DIMMING 0% - 100% (LENS 1)
DIMMING 0% - 100% (LENS 2)
DIMMING 0% - 100% (LENS 3)
DIMMING 0% - 100% (LENS 4)
DIMMING 0% - 100% (LENS 5)
DIMMING 0% - 100% (LENS 6)
DIMMING 0% - 100% (LENS 7)
DIMMING 0% - 100% (LENS 8)
Photometric Chart
Sweeper Beam LED
Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that
the fuse holder is located inside the power socket. Insert a flat-head
screw driver into the power socket and gently pry out the fuse holder.
Remove the bad fuse and replace with a new one. The fuse holder also
has a holder for a spare fuse.
Sweeper Beam LED
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Sweeper Beam LED
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
ADJ Products, LLC - www.adj.com - Sweeper Beam LED User Manual Page 22
Fuse Replacement
Cleaning
Trouble Shooting