Radio; Mp3 Player - Philips HTD3250 User Manual

Musical slideshow
If the picture and audio files are from the same
disc or USB storage device, you can create a
musical slideshow.
1
Select an audio track and then press OK.
2
Press BACK and then go to the picture
folder.
3
Select a picture and then press OK to
start the slideshow.
4
Press to stop slideshow.
5
Press again to stop music.

Radio

Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
•
AM and digital radio are not supported.
•
If no stereo signal is detected, you are prompted to
install the radio stations again.
1
Connect the FM antenna to the FM
ANTENNA on your home theater.
• For the best reception, place the
antenna away from your TV or other
sources of radiation.
2
Press RADIO to switch to radio source.
» If you have already installed the radio
stations, the last channel that you
listened to is played.
» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY appears on
the display panel. Press
3
Use the remote control to listen or to
change radio stations.
(Play).
Play buttons
Button Action
/ Select a preset radio station.
or
Alphanumeric
buttons
Navigation
Left/Right: Search for a radio
buttons
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation
of radio stations.
Press and hold to erase the
preset radio station.
RADIO Manual:
1) In radio mode, press
RADIO. 2) When a radio
frequency blinks, press OK
to store the radio station. 3)
Repeat step 1 and 2 to store
other stations.
Automatic:
In radio mode, press and
hold RADIO for three
seconds to reinstall all the
available radio station.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. When you
switch the tuning grid, all preset radio stations
are erased.
1
Press RADIO to switch to radio source.
2
Press .
3
Press and hold
50 kHz or 100 kHz.

MP3 player

Connect a MP3 player to play audio files.
What you need
(Play) to toggle between
EN
15