GE Monogram ZBD3000 Use And Care Manual page 21

USE THIS PROBLEM SOLVER
PROBLEM
CONTROL PANEL
LIGHTS GO OFF
WHEN YOU'RE
SETTING CONTROLS
DISHWASHER
WON'T RUN
UNUSUAL NOISE
DISHES DON'T DRY
UNCLEAN DISHES
QUESTIONS?
POSSIBLE CAUSE
30 seconds of the others. To relight,
A fuse in
your home maybe blown, or the circuit breaker tripped. Replace fuse or
reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be secure on rack pins, or something smrdl may have dropped from
the rack. Water is causing utensils to rattle. Make sure everything is securely placed
in dishwasher.
Water draining out of tub immediately after you touch CLEAR ~SET pad. The
sounds you hear are normal ones.
Make sure inlet water temperature is correct. (To test, see How to Test Water
Temperature section.)
Unload the bottom rack first. Water from dishes in the top rack maybe spilling
onto the bottom rack.
Check for improper loading. Dishes shouldn't nest together. Avoid overloading.
Check the rinse agent dispenser to see that it's not empty.
Check inlet water temperature. It should be at least 120°F. (To test, see How to
Test Water Temperature section.)
Water pressure may be temporarily low. Turn on a faucet. Is water coming out slower
than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See Care and Cleaning section.)
(continued next page)
21