Naming Memorized Stations
You can input a name of up to four characters for each preset station in the receiver's memory (see the previous
page). This name can be anything you choose. For example, you could input JAZZ for that station and when you
listen to it the name, rather than the frequency number, will appear on your display.
European model
1,5 5,6
2 3,5 4
multi-voltage model
1,5 5,6
1 Press the TUNER button on the
2 Press CLASS repeatedly to select the
3 Press ST + or ST – to select the preset
4 Press TUNER EDIT to select the station
5 Enter the station name you want.
6 Press ENTER when you have got the
2 3,5 4
Memo:
To change a station name, enter a new name over
the top of the existing one.
remote control.
class.
Repeatedly pressing this button cycles through the three
available classes, A, B and C.
channel.
name mode.
Names can be up to four characters long.
• Use the MULTI JOG dial (front panel) or the ST +/– but-
tons (remote) to select characters.
• Press ENTER to confirm a character. If no character is
input, a space is input.
To erase a station name, simply repeat steps 1-4 and input
four spaces instead of a name.
The possible selections are shown below.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!"#$%&'()*+,–./:;<=>?@[ \ ]ˆ_{|} [space]
characters you want to enter.
Repeat steps 2 to 5 to memorize up to 30 preset broadcast
station names.
Using the Tuner
59
En