Table Of Contents; Tractor Preparation - Cub Cadet GT 2554 Operator's Manual

2500 series
Hide thumbs Also See for GT 2554:
Table of Contents

Advertisement

Section
Tractor Preparation ..............................
Safe Operation Practices .....................
Product Graphics .................................
To The Owner ....................................
Calling Service Information ..................
I
Controls and Indicators ........................
II
Operation .............................................
III
Adjustments .........................................
IV
Maintenance ........................................
V
Mower Deck .........................................
After removing the top of the shipping crate, cut the tie
strap securing the mower deck to the side panel of the
crate. Using a hoist, or with the help of an assistant,
carefully lift the mower deck out of the shipping crate.
Cut the tie strap securing the PTO belt and remove the
belt from the deck
Remove the deck wash system nozzle adapter and the
oil drain tube from the manual bag and store for future
use.
CONNECT THE BATTERY
Battery posts, terminals and related accessories
contain lead and lead compounds. Wash hands
after handling.
CONTENTS
Page
Section
2
3
4
7
8
8
8
9
14
19
24
33

TRACTOR PREPARATION

The tractor is shipped with an activated sealed battery,
with the positive battery cable factory connected. The
negative cable must be connected.
Note: Make sure the ignition switch is in the "OFF" po-
sition before attaching the battery cable.
1. Pull the protective cap off the negative terminal of
2. Connect the negative battery cable (heavy black)
3
VI
Off-Season Storage .............................
VII
Mowing.................................................
Maintenance Chart...............................
Trouble Shooting..................................
Lubrication Table ...............................
Lubrication Guides ..............................
Specifications.......................................
Slope Gauge ........................................
Maintenance Parts Chart ....................
the battery, and remove the hex cap screw and nut
from the free end of the negative battery cable.
and ground wire (green) to negative terminal
(NEG) of the battery using the hex cap screw and
nut. Slide the black terminal cover over the
negative terminal of the battery.
Page
44
45
46
47
48
50
51
54
55
57
58
60

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents