Template For Nameplate Location
To be used when door swing has been reversed,
with handle on right side, hinge on left side.
To position new nameplate:
• Remove the original nameplate, now located on
the bottom of the door.
• Cut template along dotted line.
• Hold or tape template behind glass door in the
upper left corner so that it is visible from the
front side.
• Remove backing from Monogram nameplate.
• Place nameplate onto front side of door,
matching illustration on template.
®
Monogram.
General Electric Company
Louisville, KY 40225
Cut on Dotted Line
Upper Left
Top of Name Plate
Corner of
Glass
DOOR
NAME PLATE
LOCATION
Door Frame Side
NOTE: While performing installations described in this book,
safety glasses or goggles should be worn.
For Monogram local service in your area, call
1-800-444-1845.
NOTE: Product improvement is a continuing endeavor at General
Electric. Therefore, materials, appearance and specifications are
subject to change without notice.
Template
Beverage Center & Wine Chiller
Up pe r Le
ft
Co rne r
of
Gla ss
To p of
Na me Pla
te
To p of
Gla ss Do
or
DO OR
NA ME
PL AT E
LO CA TIO
N
Do or Fra
me Sid
e
P/N 41
00 52 63
Top of Glass Door
Pub. No. 49-60148
Part No. 197D4432P001
(N.D. 204) 6/01
41006773 Rev. A