The 'Solo' Part - Kawai Concert Performer CP139 Quick Start Manual

Page
12

THE 'SOLO' PART

The SOLO part allows a fourth instrument sound to be combined with the existing RIGHT 1 and/or RIGHT 2 parts.
Step 1
Press the SOLO panel button.
Step 2
Select the Exp Jazz Clarinet sound for the SOLO part.
2
Step 3
Play the keyboard.
The sound of the Concert Grand, Strings, and Clarinet will all be heard simultaneously.
You may wish to deactivate the RIGHT 1 and/or RIGHT 2 parts in order to hear the SOLO instrument more clearly.
The SOLO part is intended for playing monophonic voices, such as flute, saxophone, and other woodwind
instruments. When two or more keys are pressed simultaneously, only the highest note will be played, however
this behavior can be adjusted if necessary. For more information, please refer to the Solo Settings instructions
in the main CP139 owner's manual.
It is also possible to define an additional SPLIT POINT for the right side of the keyboard, specifically for the SOLO
part. For more information, please refer to the Solo Settings instructions in the main CP139 owner's manual.
As we have seen, assigning instrument sounds to each part is a relatively simple process. Yet by activating and
deactivating the parts it is possible to create rich, complex voices, allowing up to four different instrument sounds to be
played simultaneously, across the keyboard.
The SOLO box will become highlighted to indicate
that the part is active.
The LED indicator for the SOLO panel button will
also turn on.