JVC AV-14A16 Instructions Manual page 11

Using the TV's menus
ON TIMER
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
1 Press MENU T to display the
"MENU 1" menu, then select
"ON TIMER".
MENU
INPUT
ON TIMER
PR 1 0:00
VNR
OPERATE BY VOL-+
SELECT BY EXIT BY
PROGRAM BY -+ D I SPLA Y
2 Press MENU M to select a channel
you want to view when the TV turns
on.
3 Press VOLUME M to select the
period of time after which you want
to turn on the TV.
The ON TIMER function starts.
• Each time you press the button, the period
of time changes in 15 minute intervals (up
to 12 hours).
To cancel the ON TIMER function,
press the VOLUME m button to set the
period of time to "0:00".
4 Press DISPLAY to turn the display
off.
• If you turn off the TV's main power by
pressing the Main power button, the ON
TIMER function is canceled.
• If you do not turn off the TV after starting
the ON TIMER function, the channel will
automatically switch to the channel set for
the ON TIMER function.
1
Channel
TV
No.
OFF
When the time set for the ON TIMER
function is reached:
The TV automatically turns on and the
channel set for the ON TIMER function is
displayed.
• For safety reasons the TV will automatically
turn off if no operations are made within
approximately two hours after the TV is
turned on with the ON TIMER function.
• The OFF TIMER function and AUTO
SHUTOFF function have priority over the ON
TIMER function.
INPUT
You can view images from VCRs or other
devices connected to your TV.
1 Press MENU T to display the
"MENU 1" menu, then select
"INPUT".
MENU
INPUT
ON TIMER
PR 1 0:00
VNR
SELECT BY EXIT BY
OPERATE BY -+ D I SPLA Y
2 Press MENU M to select the VIDEO
mode.
While you press MENU –/+, it will
switch to TV mode and VIDEO mode
alternately.
1
TV
OFF
11