Antenna Supply - Univers by FTE U3500 Installation Manual

ANTENNA SUPPLY

CONNECTION TO DVB-T RECEIVER WITH 5VDC
ANTENNA SUPPLY – SERIES U4150/ U5000
You must connect a coaxial cable with F connector to U3500
antenna. The other end of the coaxial cable will be directly
connected to the series U4150/ U5000 receiver (image 2).
Image 3
Image 2
Then, you will have to setup the receiver to be able to feed
5VDC through coaxial cable.
CONFIGURATION OF THE RECEIVER (SERIES U4150):
Image 4
To configure 5VDC feeding through coaxial cable to U3500
antenna, please follow next steps:
Access to "Aerial Adjustment" option, inside "Installation" menu.
To do this, press the MENU button at the remote control and
choose the option Installation using VW keys and press OK.
Go to the field Aerial Adjustment and press OK (image 3).
Next screen will be showed in TV, where you can activate/
deactivate 5 VDC power supply through coaxial cable.
Go to the option "tuner power" using the VW keys and choose
between "On" or "Off" with UT keys for feeding or not 5VDV
through coaxial cable (image 4).
Changes will be saved when leaving this menu. To do this, press the
menu key at the remote control.
8 8